ICON 2022-2023 Toyota Tundra/2023 Toyota Sequoia Front EXP Coilover at Sexton Offroad in Salt Lake City & Park City, Utah

The 2022-2023 Toyota Tundra/2023 Toyota Sequoia EXP Series front shock absorbers by ICON Vehicle Dynamics combine the performance of a fully rebuildable 2.5-inch diameter premium shock absorber with the convenience and cost-benefits of re-using the truck’s factory coil spring and other components. EXP bridges the gap between spacer lifts and threaded bodied coilovers, providing suspension lift, custom-tuned performance and maximum travel, all in an economical package. EXP Series is based on ICON’s proven 2.5-inch diameter Aluminum Series shock absorber, featuring a one-piece impact-extruded aluminum shock body. Hard anodizing provides a great-looking, consistent finish with superior resistance to abrasion and corrosion. The massive 7/8-inch diameter shaft is induction hardened and chrome plated. EXP shocks use the factory shaft-up orientation, with the shaft ends machined to re-use the Tundra’s OE upper shock and spring mounts. The 6061-billet aluminum coil spring seat is CNC machined to fit the molded heavy duty urethane coil spring seat that is specifically designed to fit the vehicle’s OE coil spring. A series of snap-ring grooves machined into the shock body provide easily-selectable front-end ride height adjustment from 0" to 3” of lift over stock. EXP Series shocks utilize a one-piece digressive piston design and are custom tuned for the Tundra/Sequoia in conjunction with their stock front coil springs to maximize damping performance and provide unsurpassed ride quality, on and off-road. The increased piston size and shock oil volume provided by the 2.5-inch diameter aluminum body also provide superior heat dissipation compared to the smaller, steel bodied OE shocks, resulting in longer-lasting shock performance over prolonged use at higher speeds and through rougher terrain. For those who would like to further tune their suspension, EXP shocks are fully re-valvable (and rebuildable) by any qualified shock technician, with parts available from ICON.

Features | Specification:

• Vehicle specific design for 2022-2023 Toyota Tundra and 2023 Sequoia
• Vehicle specific tuned for superior shock damping and control
• 2.5 Aluminum Series Shock with Internal Reservoir
• Adjustable ride heights from 0-3" of front lift over stock with the use of snap ring
• Utilizes factory coil and coil hardware
• Inverted shaft up design featuring 7/8" diameter, induction hardened, chrome plated shaft
• Impact extruded, hard anodized aluminum cylinder offers excellent corrosion resistance and consistent finish
• CNC machined 6061 aluminum components with a black anodized finish
• PTFE lined spherical bearing for extended longevity and minimal deflection
• Fully rebuildable and re-tunable

Note(s):

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5.75” Backspace / 25mm Offset
• Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 6” Backspace / 25mm Offset
• Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
• APPLICATION NOTE #55: Shocks Are Fully Serviceable. Lift Heights Indicated Are For A Stock Equipped Vehicle.
• APPLICATION NOTE #85: Advertised Lift Height Ranges Are For A Stock Equipped Vehicle. Increasing Weight Of Vehicle Due To Accessories Will Alter Lift Range.
• APPLICATION NOTE #144: Not Compatible With Trd Pro
• APPLICATION NOTE #148: ICON Does Not Recommend Lifting Above 2.25" (Tundra)/3.75" (Sequoia) Without An ICON Upper Control Arm, Failure To Do So Can Result In Improper Wheel Alignment And Cause Damage To Front Axles On 4Wd Models
• APPLICATION NOTE #149: For 4Wd Models Without Trd Off-Road Package ICON Recommends Using ICON Diff Drop (Part# 55156) Or Using Toyota Trd Axles (Part# 434200C020 Driver / 434100C020 Pass). Failure To Do So Could Result In Front Axle Damage. Not Required For Trd Pro.
• If upgrading a vehicle equipped with Adaptive Variable Suspension (AVS) all other vehicle systems remain functional
• Tundra lift heights above 2.25” require sway bar drop bracket kit part number 55154. Required for all lift heights on Sequoia.
• Tundra SR5 equipped with TRD Sport packages will have lift height range of 1-4” over stock
• Most Sequoia sub-models will have front lift height range of 0-2.13” over stock
• EXP Coilovers are sold individually. A quantity of 2 are required per vehicle.

Upgrade your 4x4 with quality parts and accessories from Sexton Offroad. Visit us for installation at our Salt Lake City or Park City, Utah locations. Plus, enjoy free shipping on thousands of products nationwide!

This Item Fits:

• Toyota Tundra 1794 Edition 2022 - 2023 4WD
• Toyota Tundra Platinum 2022 - 2023 4WD
• Toyota Tundra Limited 2022 - 2023 4WD
• Toyota Tundra SR5 2022 - 2023 4WD
• Toyota Tundra SR 2022 - 2023 4WD
• Toyota Tundra SR 2022 - 2023 RWD
• Toyota Tundra SR5 2022 - 2023 RWD
• Toyota Tundra Limited 2022 - 2023 RWD
• Toyota Tundra Platinum 2022 - 2023 RWD
• Toyota Tundra 1794 Edition 2022 - 2023 RWD
• Toyota Tundra Capstone 2022 - 2023
• Toyota Tundra Platinum 1794 Edition 2022
• Toyota Tundra SR5 TRD Off-Road 2022
• Toyota Tundra SR TRD Off-Road 2022
• Toyota Tundra Limited TRD Off-Road 2022
• Toyota Sequoia SR5 2023 4WD
• Toyota Sequoia SR5 2023 RWD
• Toyota Sequoia Limited 2023 4WD
• Toyota Sequoia Limited 2023 RWD
• Toyota Sequoia Platinum 2023 4WD
• Toyota Sequoia Platinum 2023 RWD
• Toyota Sequoia Capstone 2023 4WD
• Toyota Sequoia Capstone 2023 RWD
• Toyota Sequoia TRD Off-Road 2023